| 液压剪板机保养方法 |
| 添加时间：2020/7/6 16:43:45 浏览次数： |
| 液压剪板机保养方法 Maintenance method of hydraulic shear 1、严格按照操作规程进行操作。 1. Operate in strict accordance with the operating procedures. 2、每次开机前按润滑图表要求定时、定点、定量加润滑油，油应清洁无沉淀。 2. Before each start-up, the lubricating oil should be added at fixed time, fixed point and fixed quantity according to the lubrication chart. The oil should be clean and free of sediment. 3、机床必须经常保持清洁，未油漆的部分防锈油脂。 3. The machine tool must always be kept clean and the unpainted part of the antirust grease. 4、电动机轴承内的润滑漾油要定期更换加注，并经常检查电器部分工作是否正常安全可靠。 4. The lubricating oil in the motor bearing should be replaced and filled regularly, and the electrical equipment should be checked regularly to see if it is safe and reliable. 5、定期检查三角皮带、手柄、旋钮、按键是否损坏，磨损严重的应及时更换，并报备件补充。 5. Regularly check whether the V-belt, handle, knob and key are damaged. If the wear is serious, it should be replaced in time and reported to the spare parts for supplement. 6、定期检查修理开关、保险、手柄、保证其工作可靠。 6. Regularly check and repair the switch, fuse and handle to ensure their reliable operation. 7、每天下班前10分钟，对机床加油润滑及擦洗清洁机床。 7. 10 minutes before going off duty every day, lubricate and clean the machine tool. 8、严禁非指定人员操作该设备，平常必须做到人离机停。 8. It is strictly forbidden for non designated personnel to operate the equipment. Normally, people must leave the machine and stop. |
| 上一页 箱式剪切机是一种高效的废钢处理设备 |
| 下一页 生产性废钢铁 |
Copyright © 技术支持：遨游网络