| 剪板机维护保养的方法 |
| 添加时间：2019/11/8 16:58:05 浏览次数： |
| 剪板机维护保养的方法 Maintenance methods of plate shears 1、严格按照操作规程进行操作。 1. Operate in strict accordance with the operating procedures. 2、每次开机前按润滑图表要求定时、定点、定量加润滑油，油应清洁无沉淀。 2. Add lubricating oil regularly, regularly and quantitatively according to the requirements of lubrication chart before each startup, and the oil shall be clean and free of precipitation. 3、机床必须经常保持清洁，未油漆的部分防锈油脂。 3. The machine tool must always be kept clean, and the unpainted part of anti rust grease. 4、电动机轴承内的润滑漾油要定期更换加注，并经常检查电器部分工作是否正常安全可靠。 4. The lubricating oil in the motor bearing shall be replaced and filled regularly, and the electrical part shall be checked regularly for normal, safe and reliable operation. 5、定期检查三角皮带、手柄、旋钮、按键是否损坏，磨损严重的应及时更换，并报备件补充。 5. Regularly check whether the V-belt, handle, knob and key are damaged. If they are seriously worn, replace them in time and report to the spare parts for supplement. 6、定期检查修理开关、保险、手柄、保证其工作可靠。 6. Check and repair the switch, fuse and handle regularly to ensure its reliable operation. 7、每天下班前10分钟，对机床加油润滑及擦洗清洁机床。 7. Lubricate and scrub the machine tool 10 minutes before work every day. 8、严禁非指定人员操作该设备，平常必须做到人离机停。 8. It is strictly prohibited to operate the equipment by non designated personnel. In general, it is necessary to stop the equipment when people leave the machine. |
| 上一页 门式剪切机是重要的工程机械设备 |
| 下一页 废钢铁的主要用途就是回炉炼钢 |
Copyright © 技术支持：遨游网络