| 160型废钢剪切机 |
| 添加时间：2018/1/15 16:28:22 浏览次数： |
| 废铁废钢剪切机适用于金属回收加工厂、报废汽车拆解场、冶炼铸造行业，对各种形状的废钢及各种金属结构进行冷态剪断，加工成合格炉料。该系列产品特点：①采用液压驱动，安全性能可靠，操作方便。②工作刀口长度：400mm、600mm、700mm、800mm、1000mm、1200mm；剪切力从63吨至400吨八个等级，适合不同规模不同要求用户的选择。③安装不须底脚螺丝，无电源的地方可用柴油机作动力 Scrap iron scrap cutting machine is suitable for metal recycling plant, scrap car disassembly field, smelting and casting industry, cold cuts all kinds of scrap steel and all kinds of metal structures, and is processed into qualified burden. The features of the series are as follows: (1) the hydraulic drive is used, the safety performance is reliable, and the operation is convenient. Second, the length of the knife edge is 400mm, 600mm, 700mm, 800mm, 1000mm and 1200mm, and the shear force is eight grades from 63 tons to 400 tons, which is suitable for users of different sizes and different requirements. The installation is not required to place the foundation bolt and available engine without power supply for power |
| 上一页 废钢打包剪切机，提高废钢利用率 |
| 下一页 剪切机操作规程 |
Copyright © 技术支持：遨游网络