联系我们
公司名称：XXX
电话：XXX
手机：XXX
联系人：XXX
地址：XXX
新闻动态
剪切机使用注意事项
剪切机使用注意事项： Precautions for the use of shears: 1.未经学习，不了解机器结构、性能和操作规程者不得擅自开动机器。 1. Without learning, the machine structure, performance and operation procedures shall not be operated without permission. 2.机器各润滑处应按要求，每班至少加注一次润滑油。 2. The lubricating parts of the machine shall be lubricated at least once every class according to the requirements. 3.加入油箱内的液压油，应严格使用高品质的抗磨液压油，必须经过严格过滤，并且应经常保持足够的油量，不足时应立即加注油液。 3. To add hydraulic oil in the tank, strict use of high quality anti-wear hydraulic oil should be strictly filtered, and sufficient amount of oil should be kept, and the oil should be added immediately when insufficient. 4.油箱每半年应清洗并更换新油一次，但第一次清洗过滤油液不能超过一个月，使用过一次的新油液经过严格过滤后允许再用一次。 4. The fuel tank should be cleaned and replaced once every six months, but the first cleaning of the filtrate can't exceed one month. Once the new oil has been strictly filtered, it is allowed to be used again. 5.当出现比较严重漏油或在工作中发生异常现象时，应立即停车，分析原因并排除故障，不得强行带病运转。 5. When there is a serious oil spill or abnormal phenomenon at work, stop the car immediately, analyze the reasons and troubleshoot, shall not force the disease to operate. 6.机器在运转或打包过程中，不得进行修理或用手抚摸运动部位，严禁用手或脚在料箱内按压物料。 6. In the process of operation or packing, the machine shall not repair or touch the moving part of the body, and it is forbidden to press the materials in the material box with hands or feet
